Should The Automatic Transmission Solenoid Valve Be Replaced Regularly?
The automatic transmission solenoid valve is not a wearing part and does not need to be replaced regularly. Various solenoid valves in AT, CVT or dual-clutch transmissions are integrated on the oil circuit board. What we need to replace regularly is the transmission oil. Because the work of the solenoid valve is to adjust the oil pressure of each chamber in the oil pan to adjust the gear position, and whether the oil pressure can establish the quality of the transmission oil is very important. The recommended oil change cycle for the transmission is 3 years and 100,000 kilometers. The fault phenomena of the transmission solenoid valve include a sense of frustration when shifting, shifting shock, inability to shift up, and engine fault light.
Precautions for changing transmission oil:
1. Transmissions of different types of transmission oil cannot be mixed, and special transmission oil must be used.
2. There are many ways to change oil. Drain oil by gravity, drain oil by circulating machine, and drain oil by removing the oil pan. If the vehicle mileage is more than 150,000, it is not recommended to use a circulating machine to drain oil. If the impact of the circulating machine is too large, there will be sludge inside the gearbox, which is a hidden danger to the gearbox valve body. For example, if you change the oil by gravity, it is recommended to change it several times to better discharge the old oil.
3. Remove the oil pan and drain the oil. It is recommended to replace the transmission filter at the same time. The transmission oil pan gasket cannot be reused!






