Flying Bull (Ningbo) Electronic Technology Co., Ltd.

enLanguage

The main reasons for the zero drift of the pressure sensor

The main reasons for the zero drift of the pressure sensor are as follows:
1. There are bubbles or impurities in the glue layer of the strain gauge
2. The performance of the strain gauge itself is unstable
3. There are cold solder joints in the circuit
4. The stress release of the elastic body is incomplete; in addition, it is also related to the magnetic field, frequency, temperature, etc. Electrical drift or some drift will exist, but we can reduce its range or correct it in some ways.
Zero thermal drift is an important indicator that affects the performance of the pressure sensor and is widely valued. Internationally, it is believed that zero thermal drift only depends on the inequality of the force-sensitive resistor and its temperature nonlinearity. In fact, zero thermal drift is also related to the reverse leakage of the force-sensitive resistor. At this point, polysilicon can absorb heavy metal impurities in the substrate, thereby reducing the reverse leakage of the force-sensitive resistor, improving zero thermal drift, and improving the performance of the sensor.
What other ways are there to reduce electrical drift and correct electrical drift? In addition to affecting the measurement accuracy and reducing the sensitivity of the pressure sensor, what other important effects does zero electrical drift have?
The thermal zero drift of the pressure sensor can be eliminated by using zero-point electrical drift. The so-called zero-point drift refers to the phenomenon that when the input end of the amplifier is short-circuited, an irregular and slowly changing voltage is generated at the input end. The main reason for the zero-point drift is the influence of temperature changes on transistor parameters and the fluctuation of power supply voltage. In most amplifiers, the zero-point drift of the front stage has the greatest impact. The more stages and the greater the amplification factor, the more serious the zero-point drift.
The size of the drift mainly depends on the selection of strain materials. The structure or composition of the material determines its stability or thermal sensitivity.
The processing after the material is selected is also very important. Different processes will produce strain values ​​with different effects. The key lies in the stability or regularity of the bridge value after some aging and other adjustments.
There are many ways to adjust the drift, most of which are determined by the manufacturer's conditions or production needs. Most manufacturers have good control over the zero-point drift. Temperature adjustment can be compensated and aged by internal temperature resistors and heating zero-sensitivity resistors.
For transformers using circuit conversion, the drift of the circuit part can be compensated by selecting good components and designing more suitable circuits.
The strain material should be selected with high sensitivity coefficient and small temperature change.

You Might Also Like

Send Inquiry