Wirtgen Solenoid Valve Replaced
Precise Fluid Control for Road Construction – Wirtgen Solenoid Valve 23871482 Wirtgen is a world‑leading manufacturer of road milling machines, cold planers, slipform pavers, and surface miners. These machines depend on precise hydraulic control to cut pavement to exact depths and profiles. The Wirtgen solenoid valve replaced by Flying Bull (OE No. 23871482) is a direct replacement hydraulic valve for Wirtgen equipment. It operates with oil media under ordinary pressure. The valve is 100% brand new, manufactured in Zhejiang, China, and backed by a 1‑year warranty. Delivery takes 5–7 working days. Introduction – the Wirtgen solenoid valve The Wirtgen solenoid valve is a product of the Wirtgen company. It is widely used in applications requiring precise control of fluid flow, such as: Industrial manufacturing. Automatic control systems. Road construction machinery (milling machines, pavers, recyclers). Wirtgen solenoid valves are available in a wide range of pressure classes, sizes, and durable materials. They are engineered to ensure long service life and low internal leakage – critical for maintaining consistent cutting depth and machine stability. Three common reasons to replace a Wirtgen solenoid valve 1. Solenoid valve damage – Due to long‑term use, electrical failure, fluid corrosion, or contamination, the solenoid valve may become damaged. A damaged valve may not shift at all, may leak internally, or may cause erratic machine movement. Damaged valves cannot be repaired – they must be replaced. 2. Performance decline – Even if the solenoid valve is not completely damaged, performance may degrade over time. Symptoms include: Reduced flow (machine moves slower than normal). Increased response time (delay between joystick movement and machine action). Increased internal leakage (weak cylinder force, overheating). When performance decline affects machine productivity or safety, replacement is needed. 3. System upgrade – As system requirements change (e.g., a control system modernization or new attachment), you may need a solenoid valve with higher performance or new functions (e.g., proportional control instead of on/off). Step‑by‑step replacement procedure for solenoid valve 23871482 Step 1 – Prepare tools – Based on the model and installation position of solenoid valve 23871482, gather the required tools. Typical tools include: Screwdriver (flathead and Phillips). Wrench set (metric sizes). Cable pliers (for electrical connectors). Container for drained hydraulic oil. Step 2 – Shut down the system – Before replacing the solenoid valve 23871482, ensure that the relevant system or equipment is turned off. Shut down the engine, disconnect the battery, and relieve hydraulic pressure. This prevents hazards such as: Fluid leakage (high‑pressure oil spray can injure). Electric shock (if working with live wires). Unexpected machine movement. Step 3 – Remove the old solenoid valve – Remove the old Wirtgen solenoid valve according to the manufacturer’s instructions or professional guidance. During disassembly: Disconnect hydraulic lines (cap or plug open ports to prevent dirt entry). Disconnect electrical wires. Mark and record the connection method and location of each wire. Take a photo if needed. This is critical for correct reassembly. Step 4 – Install the new solenoid valve – Install the new Wirtgen solenoid valve (23871482) in the proper position. Ensure it is installed in the same orientation and with the same connection method as the old solenoid valve. When connecting wires, follow the previous marks and records. Use new O‑rings or seals. Tighten to the recommended torque. Step 5 – Check and test – After installation is complete: Check that connections are firm (no loose fittings). Check that wires are in good contact (no loose terminals, no corrosion). Start the system or equipment at idle. Test the function controlled by the valve – operate through full range. Verify that the performance of the new solenoid valve is normal – smooth movement, correct speed, no leaks. Why choose Flying Bull for the Wirtgen solenoid valve 23871482? Direct replacement – Matches Wirtgen original part 23871482. Low internal leakage – For stable, predictable machine control. Long service life – Durable materials and precision manufacturing. 100% brand new – Not rebuilt or remanufactured. 1‑year warranty – Against manufacturing defects. Fast delivery – 5‑7 working days from Zhejiang, China. Flying Bull’s Wirtgen solenoid valve replaced (23871482) is a reliable, high‑quality replacement. Follow the step‑by‑step procedure above for a safe, successful installation. Choose Flying Bull to keep your Wirtgen road construction equipment operating at peak performance.
Product Introduction
Products Description
|
OE NO.: 23871482 |
Media: Oil |
|
Warranty: 1 YEAR |
Condition: New, 100% Brand-new |
|
Place of Origin: Zhejiang, China |
Item: Solenoid |
|
Brand Name: FLYING BULL |
Quality: High-Quality |
|
Delivery: 5-7 Working Days |
Pressure: Ordinary Pressure |
Hydraulic Valve 23871482 Construction Machinery Parts
Introduction of Wirtgen Solenoid Valve
The Wirtgen solenoid valve is a product of the Wirtgen company, which is widely used in the application of precise control of fluid flow, such as industrial manufacturing, automatic control systems and other fields. The solenoid valves are available in a wide range of pressure classes, sizes and durable materials to ensure long service life and low internal leakage.
The replacement of Wirtgen solenoid valve reasons
1. Solenoid valve damage: Due to long-term use, electrical failure, fluid corrosion and other reasons, the solenoid valve may be damaged, resulting in normal work.
2. Performance decline: Even if the solenoid valve is not completely damaged, the performance decline (such as reduced flow, increased response time, etc.) may need to be replaced.
3. System upgrade: As system requirements change, solenoid valves with higher performance or new functions may be required.
Replacement steps
1. Prepare tools: Prepare required tools, such as screwdrivers, wrenches, and cable pliers, based on the model and installation position of solenoid valve 23871482.
2. Shut down the system: Before replacing the solenoid valve 23871482, ensure that the relevant system or equipment is turned off to prevent hazards such as fluid leakage or electric shock.
3. Remove the old solenoid valve: Remove the old Wirtgen solenoid valve according to the manufacturer's instructions or professional instructions. During the disassembly process, pay attention to marking and recording the connection method and location of the wire.
4. Install the new solenoid valve: Install the new Wirtgen solenoid valve in the proper position, ensuring that it is installed in the same way as the old solenoid valve. When connecting wires, follow the previous marks and records to connect.
5. Check and test: After the installation is complete, check whether the connection of the new solenoid valve is firm and whether the wire is in good contact. Then start the system or equipment to test whether the performance of the new solenoid valve is normal.



Company Introduction







Frequently Asked Questions (FAQ)
1. What is the OE number and application of this Wirtgen solenoid valve?
The OE number is 23871482. This hydraulic solenoid valve is used in Wirtgen road milling machines, cold planers, slipform pavers, surface miners, and other road construction equipment. It provides precise control of fluid flow.
2. What are the key features of Wirtgen solenoid valves?
Wirtgen solenoid valves are available in a wide range of pressure classes, sizes, and durable materials. They are engineered for long service life and low internal leakage – critical for maintaining consistent cutting depth and machine stability.
3. What are three common reasons to replace a Wirtgen solenoid valve?
(1) Solenoid valve damage – due to long‑term use, electrical failure, fluid corrosion, or contamination. (2) Performance decline – reduced flow, increased response time, or increased internal leakage. (3) System upgrade – need for higher performance or new functions.
4. What are the symptoms of a solenoid valve with performance decline?
Symptoms include: reduced flow (machine moves slower than normal), increased response time (delay between joystick movement and machine action), and increased internal leakage (weak cylinder force, hydraulic overheating). The valve may still work but not at original performance.
5. What tools are needed to replace the 23871482 solenoid valve?
Typical tools: screwdriver (flathead and Phillips), wrench set (metric sizes), cable pliers (for electrical connectors), and a container for drained hydraulic oil. Also have new O‑rings or seals.
6. What safety steps must be taken before replacing the solenoid valve?
Shut down the engine, disconnect the battery, and relieve hydraulic pressure. This prevents hazards: high‑pressure oil spray, electric shock, and unexpected machine movement. Never work on a pressurized hydraulic system.
7. How do I ensure correct electrical reconnection after replacing the valve?
During removal, mark and record the connection method and location of each wire. Take a photo if needed. When installing the new valve, follow your marks and records to connect wires correctly. Using the wrong connection can damage the coil or cause improper valve operation.
8. How do I test the new solenoid valve after installation?
(1) Check that connections are firm and wires are in good contact. (2) Start the system at idle. (3) Test the function controlled by the valve – operate through full range. (4) Verify smooth movement, correct speed, and no leaks. If performance is abnormal, re‑check installation.
9. Does the Wirtgen solenoid valve 23871482 come with a warranty?
Yes. Flying Bull provides a 1‑year warranty against manufacturing defects. Damage caused by contamination (dirty oil), incorrect installation (wrong torque, missing seals), overpressure, voltage issues, moisture ingress, or physical damage is not covered.
10. Is this valve a direct replacement for the original Wirtgen part?
Yes. The 23871482 is manufactured as a direct replacement for the original Wirtgen solenoid valve. It matches the original mounting dimensions, port sizes, flow characteristics, pressure rating, voltage, and connector type. Always verify your original part number before ordering.
Hot Tags: wirtgen solenoid valve replaced, China wirtgen solenoid valve replaced manufacturers, suppliers, factory, zoomlion solenoid valve replaced, john deere solenoid valve replaced, hitachi solenoid valve replaced, hydraulic valve, kubota solenoid valve replaced, sunward solenoid valve replaced
You Might Also Like
Send Inquiry










