Engine Solenoid Valve

The 29544297 transmission solenoid for the TEREX TR35 is an Engine solenoid valve

Applicable to Allison B300-B500 transmission solenoid valve 29544297, 0260130085

There are many manifestations of transmission solenoid valve failure, as follows:

1, Transmission solenoid valve as the actuator of the hydraulic system, if there is a failure, it may lead to fluid can not normally flow into the transmission body, so that the accurate gear can not be pressurized, which will make the transmission unable to downshift.

2, The transmission electromagnetic valve body can realize the transformation of electrical signal to hydraulic signal, and transfer it to the shifting parts. Failure may not be able to transmit the shift signal normally, resulting in a shift delay or neutral situation.

3, Repeatedly switch between two different gears, there will be a block or refuse to shift the situation.

4, The car at the start of the corresponding gear, in the process of driving, the gearbox will be due to upshift and produce severe shaking.

The transmission solenoid valve is broken and theoretically it can still be opened, but it is better not to continue driving. Because the electromagnetic valve of the gearbox is broken, it will lead to the phenomenon of stuck transmission when shifting. If there is a fluid leak, there will be no way to change to the required gear in time, and it will cause the power of the car to drop, which is still very dangerous in the driving environment such as meeting and overtaking. Therefore, if the transmission solenoid valve is damaged, the solenoid valve needs to be replaced in time.

Frequently Asked Questions (FAQ)

1. What are the OE numbers and applications of this engine solenoid valve?
OE numbers: 29544297 (for TEREX TR35 truck) and 0260130085 (for Allison B300‑B500 transmissions). This is a transmission solenoid valve used in heavy‑duty vehicles and equipment.

2. Which Allison transmissions are compatible with the 0260130085 solenoid?
The 0260130085 solenoid is applicable to Allison B300, B400, and B500 series transmissions. These transmissions are used in buses, fire trucks, refuse haulers, construction equipment, and military vehicles.

3. What happens when a transmission solenoid valve fails (symptom 1)?
The solenoid valve is the actuator of the hydraulic system. If it fails, fluid may not flow properly into the transmission body. The correct gear cannot build enough pressure. The result: the transmission cannot downshift when needed.

4. What is symptom 2 of a failed transmission solenoid valve?
The solenoid valve body converts electrical signals from the TCU into hydraulic signals for the shifting components. Failure can prevent the shift signal from transmitting normally. The result: shift delay (several seconds) or an unexpected shift into neutral.

5. What is symptom 3 of a failed transmission solenoid valve?
When you repeatedly switch between two different gears, a failing solenoid may cause jamming (sticking) or refusal to shift. The transmission may stay in one gear – usually a limp‑home gear like 2nd or 3rd. The vehicle may not have reverse.

6. What is symptom 4 of a failed transmission solenoid valve?
The vehicle may start normally in the correct gear. But during driving, when the transmission tries to upshift, it produces severe shaking or shuddering. This is often caused by a solenoid stuck partially open or not applying pressure smoothly.

7. Can I drive with a broken transmission solenoid valve?
Theoretically, the vehicle can still be driven (often in limp mode). But it is better not to continue driving. A broken solenoid causes jamming when shifting. If there is a fluid leak, you cannot engage the required gear in time. Vehicle power drops – dangerous for meeting traffic or overtaking.

8. Why is it dangerous to drive with a failed transmission solenoid?
The vehicle may lose power unexpectedly or shift into neutral during overtaking or climbing a hill. You could lose control or be unable to avoid a collision. The transmission could also suffer internal damage from running with low pressure or slipping clutches.

9. Does the engine solenoid valve 29544297 come with a warranty?
Yes. Flying Bull provides a 1‑year warranty against manufacturing defects. Damage caused by contamination (dirty oil), incorrect installation, overpressure, voltage issues, or physical damage is not covered.

10. Is this valve a direct replacement for the original TEREX or Allison part?
Yes. The 29544297 / 0260130085 is manufactured as a direct replacement for the original engine solenoid valve. It matches the original mounting dimensions, port sizes, flow characteristics, pressure rating, voltage, and connector type. Always verify your original part number before ordering.

Hot Tags: engine solenoid valve, China engine solenoid valve manufacturers, suppliers, factory, automotive solenoid valve, engine solenoid valve, auto solenoid valve, car solenoid valve