Hydraulic Coil
24V Solenoid Coil for Construction Machinery – Hydraulic Coil R901393577 Construction machinery – excavators, loaders, and road equipment – depends on reliable solenoid coils to control hydraulic valves. A faulty coil can cause valve sticking, slow response, or complete machine shutdown. The hydraulic coil from Flying Bull (Model R901393577) is an insert-type solenoid valve coil with a circular design. It is suitable for hydraulic control systems in construction machinery and can be used as a compatible supporting component for Rexroth hydraulic equipment. The coil is 100% brand new, manufactured in Zhejiang, China, and backed by a 1‑year warranty. Delivery takes 5–7 working days. Product overview – what this coil does This product is a plug‑in solenoid valve coil with a circular design, classified under pneumatic components. It is suitable for hydraulic control systems in construction machinery and can be used as a compatible supporting component for Rexroth hydraulic equipment. The brand is FLYING BULL, supplied as 100% brand‑new and genuine directly from the original manufacturer, meeting the procurement needs of wholesalers for standardized hydraulic accessories. Electrical performance and voltage ratings The coil is rated for 24VDC, providing stable voltage compatibility for common 24V DC power systems in construction machinery. This ensures reliable actuation and operation within hydraulic control circuits, reducing the risk of failures due to voltage mismatch. Operating pressure Designed for standard pressure conditions, the coil is compatible with most construction machinery hydraulic systems operating under normal pressure. It can be directly applied in general hydraulic control environments without requiring additional pressure adaptation, offering broad applicability. Maintenance guidelines – keeping your coil reliable Hydraulic coil maintenance is key to ensuring long‑term stable operation. Follow these basic maintenance steps and precautions: 1. Clean and lubricate Use a rag or soft brush to clean the surface of the coil regularly to remove dust and debris. Apply a coat of lubricant to the coil surface to reduce friction and wear. 2. Inspection and maintenance Check the appearance of the hydraulic coil regularly to ensure no obvious damage or foreign matter has entered. Check coil resistance and insulation properties to ensure they meet requirements. Check the seal – if any wear or aging is found, replace it in time. Check the power connection to ensure cables and connections are secure and reliable. 3. Storage When not used for a long time, store in a dry, ventilated, non‑corrosive gas environment. Avoid direct sunlight, high temperature, humidity, and other adverse conditions. 4. Special notes For special models of solenoid coils (e.g., Parker Solenoid coil PAT5002253), specific maintenance guidelines provided by the manufacturer may need to be followed. When performing maintenance, be sure to pay attention to safety procedures, such as cutting off the power supply to prevent electric shock accidents. 5. Periodic testing Perform regular functional testing of solenoid valves, including switching response time and sealing performance. Ensure the working environment of the solenoid valve is clean and dry to prevent the influence of dust and moisture. Why choose Flying Bull for the hydraulic coil R901393577? Direct replacement – Matches R901393577 specifications. 24VDC – Common construction machinery voltage. Rexroth compatible – Suitable for Rexroth hydraulic equipment. 100% brand new – Not rebuilt or refurbished. 1‑year warranty – Against manufacturing defects. Fast delivery – 5‑7 working days from Zhejiang, China. Customization available – Adapt to specific construction machinery models. Flying Bull’s hydraulic coil (R901393577) is a reliable, high‑quality replacement for construction machinery hydraulic systems. Choose Flying Bull for durable solenoid coils.
Product Introduction
Products Description
I. Product Type & Basic Specifications
This product is a plug-in solenoid valve coil with a circular design, classified under pneumatic components. It is suitable for hydraulic control systems in construction machinery and can be used as a compatible supporting component for Rexroth hydraulic equipment. The brand is FLYING BULL, supplied as 100% brand-new and genuine directly from the original manufacturer, meeting the procurement needs of wholesalers for standardized hydraulic accessories.
II. Electrical Performance & Voltage Ratings
The coil is rated for 24VDC, providing stable voltage compatibility for common 24V DC power systems in construction machinery. This ensures reliable actuation and operation within hydraulic control circuits, reducing the risk of failures due to voltage mismatch.
III. Operating Pressure
Designed for standard pressure conditions, the coil is compatible with most construction machinery hydraulic systems operating under normal pressure. It can be directly applied in general hydraulic control environments without requiring additional pressure adaptation, offering broad applicability.
IV. Maintenance Guidelines
Regularly clean the coil surface with a cloth or soft brush to remove dust and debris.
Apply lubricant as needed to minimize friction and wear.
Perform routine inspections of the coil's exterior for damage or foreign objects, and check electrical resistance and insulation to ensure they meet specifications.
Inspect seals for wear or aging and replace them promptly.
Verify that power connections, cables, and connectors are secure and intact.
When storing the coil for extended periods, keep it in a dry, well-ventilated area away from corrosive gases, direct sunlight, high temperatures, and humidity.
Always disconnect power before performing maintenance to prevent electric shock.
Regularly test solenoid valve functions, including switching response and sealing performance, to ensure long-term reliable operation of the coil.
|
OE NO.: R901393577 |
|
|
Warranty: 1 YEAR |
Condition:New, 100% Brand-new |
|
Place of Origin:Zhejiang, China |
ltem:Pneumatic parts |
|
Brand Name:FLYING BULL |
Quality:High-Quality |
|
Delivery:5-7 Working Days |
Pressure:Ordinary Pressure |
Insert solenoid valve circular coil R901393577
Hydraulic coil maintenance is to ensure its long-term stable operation of the key link, the following are some basic maintenance steps and precautions
Clean and lubricate
Use a rag or soft brush to clean the surface of the coil regularly to remove dust and debris
Apply a coat of lubricant to the coil surface to reduce friction and wear
Inspection and maintenance
Check the appearance of the Hydraulic coill regularly to ensure that no obvious damage or foreign matter has entered
Check coil resistance and insulation properties to ensure they meet requirements.
Check the seal, if any wear or aging should be replaced in time.
Check the power connection to ensure that the cables and connections are secure and reliable
deposit
When not used for a long time, it should be stored in a dry, ventilated, non-corrosive gas environment
Avoid direct sunlight, high temperature, humidity and other adverse conditions.
Special note
For special models of solenoid coils, such as Parker Solenoid coil PAT5002253, specific maintenance guidelines provided by the manufacturer1 may need to be followed.
When performing maintenance, be sure to pay attention to safety procedures, such as cutting off the power supply to prevent electric shock accidents.
Periodic testing
Perform regular functional testing of solenoid valves, including switching response time and sealing performanc
Environmental Treatment
Ensure that the working environment of the solenoid valve is clean and dry to prevent the influence of dust and moisture
Fault handling

Company Introduction







Frequently Asked Questions (FAQ)
1. What are the core specifications of the FLYING BULL hydraulic coil (Model: R901393577), and which systems is it compatible with?
The coil is an insert‑type solenoid valve circular coil classified as a pneumatic part. It operates at 24VDC (24 Volts Direct Current) and is designed for ordinary pressure working conditions, making it compatible with hydraulic control systems of construction machinery – especially suitable as a matching component for Rexroth‑related hydraulic equipment. It is 100% brand‑new, ensuring reliable performance for your assembly or replacement needs.
2. What maintenance measures are recommended to extend the service life of this hydraulic coil?
Key maintenance steps include:
Regular cleaning – Use a rag or soft brush to remove dust and debris from the coil surface, and apply lubricant to reduce friction and wear.
Routine inspections – Check the coil's appearance for damage/foreign objects, verify its resistance and insulation properties meet standards, inspect seals (replace if worn/aged), and ensure secure power connections.
Storage – When not in use long‑term, store it in a dry, ventilated environment free of corrosive gases, avoiding direct sunlight, high temperatures, and humidity.
Safety – Always cut off power before maintenance to prevent electric shock.
3. What is the warranty period for the R901393577 hydraulic coil, and what does it cover?
The product comes with a 1‑year warranty for 100% brand‑new units. The warranty covers manufacturing defects that affect normal operation (e.g., coil failure due to substandard production or insulation issues). If such problems occur within the warranty period, we provide replacement or technical support in accordance with warranty terms.
4. What is the standard delivery time for bulk orders, and can expedited delivery be arranged?
The standard delivery cycle for bulk orders is 5‑7 working days. For urgent needs (e.g., emergency maintenance of construction machinery), please contact our 24‑hour sales team. We will adjust production and logistics schedules based on your order volume and urgency to provide customized expedited delivery solutions.
5. Does FLYING BULL offer customization services for this hydraulic coil, and what customization options are available?
Yes, we provide custom service for the R901393577 hydraulic coil. Customization mainly focuses on adapting to specific construction machinery models, such as modifying parameters to match the hydraulic system requirements of equipment from brands like Sany or Liugong. Please share your detailed needs (e.g., target machinery brand, special performance requirements) with our team to get a tailored plan.
6. As a wholesaler, can we get factory‑direct pricing, and is there flexibility in minimum order quantity (MOQ)?
We offer factory‑outlet pricing exclusively for wholesalers to ensure your market competitiveness. Regarding MOQ, we provide flexible terms that depend on your long‑term cooperation plans (e.g., annual procurement volume) and immediate order demands. Please consult our sales team to confirm the most suitable MOQ for your business.
7. Are there any special notes for functional testing of this hydraulic coil during use?
To ensure stable operation, we recommend conducting regular functional tests on the matching solenoid valve (which includes the coil), covering two key aspects:
Switch response time – Verify that the coil triggers the solenoid valve to switch on/off within the normal time range.
Sealing performance – Check if the solenoid valve maintains good sealing when the coil is energized/de‑energized, preventing hydraulic oil leakage that may affect the coil's performance.
8. What are the symptoms of a failing hydraulic coil?
Symptoms include: valve does not shift (no click when energized), slow or erratic valve response, coil housing hot to the touch (overheating), visible cracks or melting on the coil, and intermittent machine operation (valve works sometimes, not others).
9. How do I test a hydraulic coil with a multimeter?
Set the multimeter to ohms (Ω). Disconnect the coil from power. Measure resistance across the two terminals. Compare to the manufacturer's specification (typically 2‑20 ohms for 24V coils). Zero ohms = short circuit. Infinite ohms = open circuit (broken wire). Out‑of‑spec resistance = faulty coil.
10. Is this coil a direct replacement for the original R901393577 part?
Yes. The R901393577 is manufactured as a direct replacement for the original hydraulic coil. It matches the original voltage (24VDC), mounting dimensions, connector type, and Rexroth compatibility. Always verify your original part number before ordering.
Hot Tags: hydraulic coil, China hydraulic coil manufacturers, suppliers, factory, solenoid coil as valve replacement, valve electromagnetic spare coil, spare coil for solenoid valve, electromagnetic valve reliable coil, solenoid coil in gas valve applications, valve electromagnetic automotive coil
You Might Also Like
Send Inquiry










