Flying Bull (Ningbo) Electronic Technology Co., Ltd.

enLanguage
Transmission Solenoid Valve 0260120024
video
Transmission Solenoid Valve 0260120024

Transmission Solenoid Valve 0260120024

# Product Introduction (Transmission Solenoid Valve 0260120024) For heavy‑duty construction machinery such as excavators and gearbox assemblies, the **transmission solenoid valve 0260120024** serves as a critical electro‑hydraulic control component that directly influences gearbox operating performance. Manufactured by Flying Bull in Zhejiang, China, this 100% brand‑new replacement solenoid valve takes hydraulic oil as its working medium under ordinary pressure, responding to electrical commands sent out from the Transmission Control Unit (TCU) to open and close internal oil passages precisely. By adjusting pressurized hydraulic fluid flow toward clutches and brake assemblies, it delivers steady, accurate gear shifts for excavators and other construction equipment. Once the original transmission solenoid valve 0260120024 wears out or malfunctions, operators will encounter typical failure symptoms including harsh shifting, transmission slipping, unexpected limp‑home mode, logged fault codes on diagnostic tools, and even complete loss of machine movement. For repair workshops and equipment owners, picking this aftermarket replacement part helps you bring faulty gearbox systems back to normal working status without overspending on high‑cost original OEM units. Every unit of the 0260120024 transmission solenoid valve comes with a 1‑year manufacturer warranty covering production defects. Standard lead time for shipment sits at 5‑7 working days after order confirmation. Proper installation matters greatly for long‑term service life. Technicians should strictly follow the full replacement workflow: prepare matching hand tools, disconnect the machine battery to protect the TCU from short‑circuit damage, drain old transmission fluid, take photos to mark component positions during disassembly, fit the new solenoid valve without over‑torquing threads or harming the valve bore, reassemble gearbox parts in reverse order, refill recommended grade transmission fluid, and run post‑installation tests across all gear ranges. Where required, complete TCU adaptation using a diagnostic scanner to achieve ideal shifting performance. Backed by over 15‑year component manufacturing experience, Flying Bull maintains standardized production workshops and holds multiple certification documents and patents. We balance reliable product quality with competitive pricing, and our 24‑hour sales support team handles inquiries and after‑sales needs for global buyers. Whether you run a machinery repair shop or maintain a fleet of construction machines, this **0260120024 transmission solenoid valve** is your practical spare‑part option to resolve gearbox solenoid‑related breakdowns efficiently. (Word count:426)

Product Introduction

Products Description

 

 

OE NO.: 0260120024

Media: Oil

Warranty: 1 YEAR

Condition: New, 100% Brand-new

Place of Origin: Zhejiang, China

Power: Diesel Engine

Brand Name: FLYING BULL

Quality: High-Quality

Delivery: 5-7 Working Days

Pressure: Ordinary Pressure

 

0260120024 Construction machinery accessories Gearbox solenoid valve excavator accessories 0260120024

 

Replacement procedure

 

1. Prepare tools:

Prepare necessary tools, such as screwdrivers, wrenches, and special removal tools. Make sure that the working area is clean, and prepare the required parts and new solenoid valves 0260120024.

 

2. Power off signal:

If the vehicle has power control, cut off the power first to avoid damage to the electrical system. Disconnect the electrical connections and signal cables related to the solenoid valve.

 

3. Discharge transmission oil:

Open the oil pan at the bottom of the gearbox and drain the gearbox oil.

Collect the old oil for subsequent treatment.

 

4. Remove the gearbox:

Remove the cover or cover of the gearbox according to the model and transmission type. Mark and record the position and sequence of the components during disassembly for subsequent installation.

 

5. Locate and remove the solenoid valve:

Inside the gearbox, locate the solenoid valve that needs to be replaced.

Carefully remove the solenoid valve using an appropriate tool, such as a screwdriver or wrench.

 

6. Install new solenoid valve:

Install the new solenoid valve 0260120024 in the original position. Ensure that the new solenoid valve matches the original model and specification to ensure its normal operation.

 

7. Reassemble the gearbox:

Reassemble the gearbox in reverse order of disassembly. Ensure that all components are properly installed and secure all screws and connectors.

 

8. Add transmission oil:

Check the oil level through the transmission dipstick and add appropriate amount of new transmission oil. Choose the transmission oil suitable for the model and follow the manufacturer's recommendations.

 

9. Testing and debugging:

Start the vehicle and test the shift and operation of the gearbox. Perform the necessary debugging and calibration if necessary.

1

2

 

3

0260120024 6
0260120024 3
0260120024 4

 

Company Introduction

 

4

5

6

7

FAQ

What core function does the transmission solenoid valve 0260120024 perform? It is an electro‑hydraulic actuator for construction machinery gearboxes. Receiving signals from the TCU, it switches oil passages to regulate hydraulic fluid pressure, controlling clutch and brake engagement for proper gear changes on excavators and heavy equipment.

What warning signs point to a faulty 0260120024 solenoid valve? You may notice rough or delayed gear shifts, transmission slipping, fault codes stored in the TCU, the machine entering limp mode, or the machine failing to move at all under power.

Why is battery disconnection mandatory before replacing this transmission solenoid valve? Power disconnection prevents accidental electrical short‑circuits. Live power during removal or fitting risks burning out the expensive TCU module and triggering unintended solenoid activation.

Do I need to drain transmission fluid to install the 0260120024 solenoid valve? Yes. This solenoid sits inside the gearbox oil pan. You have to drain old fluid to access the valve body. It is also smart to install a new transmission filter at the same time to extend the new solenoid's service life.

What should I finish after installing the new 0260120024 transmission solenoid valve? Refill gearbox with manufacturer‑approved transmission oil, double‑check fluid level. Test every gear position, watch for oil leaks. Carry out TCU calibration or shift‑learning procedures with a diagnostic scanner if your machine model requires it.

What does the 1‑year warranty for 0260120024 solenoid valve cover and exclude? The one‑year warranty covers manufacturing defects. It does not cover damage caused by contaminated transmission oil, wrong installation torque, improper fitting, voltage surge, or over‑pressure operation.

 

Hot Tags: transmission solenoid valve 0260120024, China transmission solenoid valve 0260120024 manufacturers, suppliers, factory, excavator transmission solenoid, machinery transmission solenoid valve, electric transmission solenoid valve, al4 transmission solenoid valve, transmission solenoid valve 0260120024, light duty vehicle transmission solenoid valve

Next: No Information

You Might Also Like

(0/10)

clearall