Flying Bull (Ningbo) Electronic Technology Co., Ltd.

enLanguage
Counterbalance Check Valve

Counterbalance Check Valve

Safe Load Holding & Motion Control – Counterbalance Check Valve A counterbalance check valve is normally a closed pressure valve. It is used with cylinders to support a counterweight or a potentially overrunning load. In certain processes, uncontrolled operation can occur. A counterbalance check valve prevents this. It is a hydraulic system pressure control valve that acts as a safety device. It stops the movement of a loaded actuator without the application of additional pressure from the system power unit. Most counterbalance valves are used to prevent a weight from falling uncontrollably. These valves maintain backpressure so that a load cannot drop. A counterbalance check valve allows the downward movement of a load supported by a cylinder only when the system pump is operating. Flying Bull Electronics is a professional manufacturer specializing in solenoid valve coils, special solenoid valves, and automation supporting components. Most of our products are used in pneumatic, hydraulic, and other automation control industries. Our products are trusted by many internationally renowned brands. Why Choose Flying Bull Counterbalance Check Valves? Advanced Equipment – Over 20 years of design and development experience. Focus on auto solenoid valves, sensors, and engineering machinery solenoid valves. Rich Experience – Business philosophy: “expert quality, global trust.” Purpose: “pursuing quality, never ending.” High Quality – R&D center, measurement lab, testing lab, and chemical analysis room. New high‑tech products launched every year. Professional Team – Strong R&D capabilities, first‑class talent, strict quality control, scientific management, and perfect service. Benefits of Counterbalance Check Valves 1. Safety – By preventing uncontrolled load movement, counterbalance check valves significantly enhance safety for operators and bystanders. 2. Precision Control – They enable precise control over cylinder movement, even under heavy loads, leading to smoother operation and improved accuracy. 3. Enhanced Productivity – By minimizing downtime due to uncontrolled movement, counterbalance check valves contribute to increased productivity and efficiency. 4. Reduced Wear and Tear – Controlled movement protects the cylinder and other components from excessive stress, extending equipment life and reducing maintenance costs. How Counterbalance Valves Work A counterbalance valve is a combination of a pilot‑operated relief valve and a reverse free‑flow check valve. Raising the load – The free‑flow check allows oil to flow unrestricted into the cylinder to raise the load. Holding the load – When the control valve shifts to neutral, load‑induced pressure forces the check valve closed. As long as this pressure is below the relief setting, the load stays in place. Lowering the load – When the control valve shifts to lower, pressure on the opposite side of the cylinder acts on the pilot port. This pressure combines with load‑induced pressure to overcome the relief setting. The relief valve opens, allowing controlled lowering. When the control valve shifts back to neutral, pilot pressure is lost, and the relief valve closes – holding the load again. A counterbalance valve has a modulating characteristic that is a function of both load pressure and pilot pressure. This creates an inverse pilot ratio: Light loads require more pilot pressure. Heavy loads require less pilot pressure. During normal operation, the adjustable spring force of the relief function is overcome by a combination of load‑induced pressure and pilot pressure. The higher the load‑induced pressure, the less pilot pressure is required – and vice versa. This modulation gives the counterbalance valve smooth operational control throughout a dynamic load curve. Counterbalance Valve Application A counterbalance valve is applied to create backpressure or cushioning pressure on the underside of a vertically moving piston. This prevents a suspended load from free‑falling due to gravity while it is being lowered. Lowering operation – The pressure setting on the counterbalance valve is set slightly higher than the pressure required to prevent the load from free‑falling. Due to this backpressure, the actuator piston must force down when the load is being lowered. This increases pressure, raises the spring‑opposed spool, and provides a flow path to discharge exhaust flow to the tank. The spring‑controlled discharge orifice maintains backpressure during the entire downward piston stroke. Lifting operation – The valve is normally closed. Flow in the reverse direction (from port B to port A) cannot occur without the reverse free‑flow check valve. When the load is raised again, the internal check valve opens to permit flow for cylinder retraction. Suspension (prolonged holding) – When the valve is held in suspension, the valve remains closed. Its pressure setting must be slightly higher than the pressure caused by the load. Spool valves tend to leak internally under pressure. For loads that must be held for a long time, use a pilot‑operated check valve in addition to the counterbalance valve. How to Set a Counterbalance Check Valve The relief function has two important set points: the cracking pressure (where the valve starts to open) and the reseat pressure (where the valve closes). The reseat pressure is generally about 85% of the cracking pressure. For this reason, counterbalance check valves are normally set at 1.3 times the maximum load pressure. This ensures that the valve will reseat under the heaviest load conditions. Some manufacturers may specify a setting of 1.5 times the maximum load pressure if that value is less than 2000 PSI (138 bar). Counterbalance check valves are available in a variety of pilot ratios: Lower pilot ratios (e.g., 3:1) provide better motion control and stability but are less efficient and may create excess heat. Higher pilot ratios are more efficient but may have less stable control. Pilot ratios of 3:1 or 4.5:1 are typically selected for load‑holding cylinder applications, as they provide a good balance between performance and efficiency. Materials Used in Counterbalance Check Valves PVC & CPVC – Corrosion resistance, flexibility, higher temperature rating for CPVC. Bronze & Copper – Low/medium pressure, corrosion resistance, easier to work. Cast Iron & Ductile Iron – Excellent corrosion resistance, ductile iron is stronger and bendable. Stainless Steel – Corrosion resistance, withstands harsh and chemical applications. Cast Steel – Resists sudden shocks without deformation or breakage. Polypropylene (PP) & PVDF – Exceptional corrosion resistance, acid/solvent resistance. Flying Bull’s counterbalance check valves are 100% brand new, manufactured in Zhejiang, China, and backed by a 1‑year warranty. Delivery takes 5–7 working days. Choose Flying Bull for safe load holding and precise motion control.

Product Introduction

Company Profile

 

Automotive solenoid valves and sensors are our company's featured products. At the same time, our company is also a professional manufacturer specializing in the production of solenoid valve coils and special solenoid valves and other automation supporting components. Most of our products are used in pneumatic, hydraulic and other automation control component industries. At present, our products have been used by many internationally renowned brands and are deeply trusted by our customers.

 

Why Choose Us
 

Advanced Equipment
Flying Bull (Ningbo) Electronic Technology Co.,Ltd has an excellent team with more than 20 years of experience in design and development, focusing on the design, development and production of auto solenoid valve and sensor, engineering machinery solenoid valve and sensor.

 

Rich Experience
The company adheres to the business philosophy of "expert quality, global trust" and the business purpose of "pursuing quality, never ending".

 

High Quality
Quality is always our Flying Bull's unchanging concept. The company has established a research and development center, measurement room, laboratory, and chemical analysis room, and launches a number of high-tech products every year.

 

Professional Team
The company has strong R&D capabilities to lay a good foundation for the development and cooperation of new products for customers. First-class talents, advanced equipment, strict quality control system, scientific management, perfect service, and strong R&D capabilities, let us work together to become industry pioneers and win an unlimited future.

 

product-1-1
Hitachi Solenoid Valve Replaced

Hydraulic valve 9314145 is a reverse proportional solenoid valve designed for the hydraulic pump main pump of Hitachi ZAX450-5G excavator.

product-1-1
HYUNDAI Solenoid Valve Replaced

HYUNDAI Solenoid valves are widely used and can be applied to many different industrial fields and application scenarios.

product-1-1
Takeuchi Solenoid Valve Replaced

The solenoid valve drives the spool through the magnetic force generated by the electromagnetic winding, and the response time can be as short as a few milliseconds, even the pilot-operated solenoid valve can be controlled within tens of milliseconds.

product-1-1
SUMITOMO Solenoid Valve Replaced

This solenoid valve LL00068, as an excavator accessory, is mainly used to control the rotation and rotation action of the pilot lock of the excavator.

product-750-750
Liebherr Solenoid Valve Replaced

Liebherr solenoid valves are a key construction machinery accessory, mainly used in heavy equipment such as excavators.

product-1-1
John Deere Solenoid Valve Replaced

High quality and reliability: Suitable for John Deere brand solenoid valve replacement, hydraulic valve 0501320205 model is known for high quality and reliability, ensuring stable and lasting work in a variety of working environments.

product-1-1
Kubota Solenoid Valve Replaced

Kubota steering solenoid valve: Mainly controls the flow direction and switch of steering power oil, inhales steering power oil from the tank to the steering pump, and transmits it to the steering machinery for steering control.

product-1-1
Sandviken Solenoid Valve Replaced

Sandvik solenoid valves suitable for a variety of industrial applications and applications, including mining machinery, water supply and drainage, fire protection, agricultural irrigation, industrial circulation cooling systems.

product-1-1
LiuGong Solenoid Valve Replaced

Solenoid valve 1017628 is specially designed for Liugong excavator accessories, can ensure the perfect match between Liugong excavator models.

 

What is Counterbalance Check Valve

 

The counterbalance check valve is normally a closed pressure valve and they are used with cylinders to a counterweight or a potentially overrunning load. In certain processes, there could be uncontrolled operation and this can be prevented by using a counterbalance check valve. So basically a counterbalance check valve is a hydraulic system pressure control valve that is used as a safety device to prevent the movement of a loaded actuator without the application of the additional pressure generated by the system power unit.


Mostly counter valves are used to prevent the weight from falling uncontrollably, these valves are used to maintain backpressure so that it can prevent a load from falling. A counterbalance check valve would allow the downward movement of the load supported by a cylinder only when the system pump is operating.

 

Benefits of Counterbalance Check Valve
 
 

Safety

By preventing uncontrolled load movement, counterbalance check valve significantly enhance safety for operators and bystanders.

 

Precision control

They enable precise control over cylinder movement, even under heavy loads, leading to smoother operation and improved accuracy.

 

Enhanced productivity

By minimizing downtime due to uncontrolled movement, counterbalance check valve contribute to increased productivity and efficiency.

 

Reduced wear and tear

Controlled movement protects the cylinder and other components from excessive stress, leading to extended equipment life and reduced maintenance costs.

 

Type of Counterbalance Check Valve
 

Lift check valve
Lift check valve is one of the most common types of check valves. It has a simple structure and consists of a valve body, a valve disc, a valve seat and a spring. When the fluid flows in from the inlet end, the valve disc is pushed open and the fluid can pass smoothly; when the fluid flows in the reverse direction, the valve disc is closed under the action of the spring to prevent the fluid from flowing back.

 

Swing check valve
The valve disc of the swing check valve rotates around the valve seat axis to open and close. When the fluid flows in from the inlet end, the valve disc is pushed open and rotates around the axis to allow the fluid to pass; when the fluid flows in the reverse direction, the valve disc is closed under the action of the fluid pressure to prevent the fluid from flowing back.

 

Butterfly check valve
The valve disc of the butterfly check valve is disc-shaped and is opened and closed by rotating around the axis. It has a compact structure and low fluid resistance, and is suitable for large-diameter pipelines.

 

Ball check valve
The valve disc of the ball check valve is spherical and is opened and closed by rotating around the axis. It has good sealing performance and is suitable for high-pressure, high-temperature and corrosive fluids.

 

How do Counterbalance Valves work

 

A counterbalance valve is a combination of a pilot operated relief and a reverse free flow check valve. When utilized as a load holding valve in a hydraulic cylinder application, the free flow check allows oil to flow unrestricted into the cylinder to raise the load. When the control valve is shifted to the neutral position, the load induced pressure forces the check valve closed. As long as this pressure is below the relief function setting, the load will remain in place until the control valve is shifted to lower it. Once this occurs, the pressure on the opposite side of the cylinder acts on the pilot port and works together with the load-induced pressure to overcome the relief setting. When the control valve is shifted back to neutral, the pilot pressure is lost and the relief valve closes again, holding the load in position.

 

A counterbalance valve has a modulating characteristic that is a function of both the load pressure and pilot pressure which creates an inverse pilot ratio. That is, light loads require more pilot pressure, and heavy loads require less pilot pressure. During normal operation, the adjustable spring force of the relief function is overcome by a combination of load-induced pressure and pilot pressure. The higher the load induced pressure the less pilot pressure is required – and vice versa. This modulation, gives the counterbalance valve smooth operational control throughout a dynamic load curve.

 

Counterbalance Valve Application
 

A counterbalance valve is applied to create a back pressure or cushioning pressure on the underside of a vertically moving piston to prevent the suspended load from free falling because of gravity while it is still being lowered.

Valve Operation (Lowering)
The pressure setting on the counterbalance valve is set slightly higher than the pressure required to prevent the load from free falling. Due to this back pressure in line A, the actuator piston must force down when the load is being lowered. This causes the pressure in line A to increase, which raises the spring-opposed spool, thus providing a flow path to discharge the exhaust flow from line A to the DCV and then to the tank. The spring-controlled discharge orifice maintains back pressure in line A during the entire downward piston stroke.

 

Valve Operation (Lifting)
Asthe valve is normally closed, flow in the reverse direction (from port B to port A) cannot occur without a reverse free-flow check valve. When the load is raised again, the internal check valve opens to permit flow for the retraction of the actuator.

 

Valve Operation (Suspension)
When the valve is held in suspension, the valve remains closed. Therefore, its pressure setting must be slightly higher than the pressure caused by the load. Spool valves tend to leak internally under pressure. This makes it advisable to use a pilot-operated check valve in addition to the counterbalance valve if a load must be held in suspension for a prolonged time.

 

 

Materials used in Making Counterbalance Check Valve
Transmission Shift Control Solenoid Valve
Solenoid Valve For Renault Volvo
Transmission Shift Control Solenoid Valve
Transmission Shift Control Solenoid Valve

Polyvinyl chloride (PVC): PVC is resistant to corrosion and flexibility. The smooth surface of PVC allows the check valve parts to move easily.

 

Chlorinated polyvinyl chloride (CPVC): CPVC has the same properties as PVC but withstands higher temperatures.

 

Bronze: Bronze can be used in low and medium-pressure applications, can be cast in complex configurations, and is resistant to corrosion.


Copper: Copper has the same capabilities as bronze, in addition to being easier to work with and being cheaper than bronze.

 

Cast Iron: Cast iron counterbalance check valve are used in hot and cold water, heating, air conditioning, steam, gas, and municipal services due to their excellent corrosion resistance.

 

Ductile Iron: Ductile iron contains more than 3% carbon, which makes it easily bendable and shaped. It is stronger than cast iron and easier to machine than counterbalance check valve.

 

Iron: Iron is used in steam, water, oil, and gas applications. It can withstand a wide range of temperatures and pressures. Its excellent performance is balanced by its high cost.

 

Stainless Steel: Stainless steel is resistant to corrosion and withstands harsh conditions, including chemical applications.

 

Polypropylene (PP): PP is used to make counterbalance check valve because of its exceptional corrosion resistance. It is superior to that of CPVC and PVC.

 

Polyvinylidene difluoride (PVDF): PVDF plastic is used in applications that require exceptional clarity and resistance to acids, solvents, and hydrocarbons, for example.

 

Cast Steel: Cast steel is used to produce counterbalance check valve because of its resistance to sudden shocks without deformation, breakage, or bending. It can also be easily formed into any type of check valve.

 

Craftsmanship Counterbalance Check Valve

 

The disc of the lift check valve is disc-shaped and rotates around the rotating shaft of the valve seat channel. Because the channel inside the valve is streamlined, the flow resistance is smaller than that of the lift butterfly check valve. It is suitable for large-diameter occasions with low flow rate and infrequent flow changes, but it is not suitable for pulsating flow, and its sealing performance is not as good as the lift check valve. Butterfly check valves are divided into single-disc type, double-disc type and most-disc type. These three forms are mainly divided according to the valve diameter, the purpose is to prevent the medium from stopping flowing or backflowing, and weaken the hydraulic impact.

 

Balanced check valve: A check valve whose disc slides along the vertical center line of the valve body. The internal thread check valve can only be installed on the horizontal pipe. The disc on the high-pressure small-diameter check valve can be a ball. The valve body shape of the butterfly check valve is the same as that of the stop valve (it can be used with the stop valve), so its fluid resistance coefficient is larger. Its structure is similar to that of the stop valve, and the valve body and disc are the same as the stop valve. The upper part of the valve disc and the lower part of the valve cover are processed with guide sleeves. The valve disc guide sleeve can be freely raised and lowered in the valve guide sleeve. When the medium flows downstream, the valve disc is opened by the thrust of the medium. When the medium stops flowing, the valve disc falls on the valve seat by self-sagg, which prevents the medium from flowing back. The medium inlet and outlet channels of the straight-through butterfly check valve are perpendicular to the direction of the valve seat channel; the medium inlet and outlet channels of the vertical lifting check valve are the same as the direction of the valve seat channel, and its flow resistance is smaller than that of the straight-through type.

 

Balanced check valve: A check valve in which the valve disc rotates around the pin shaft in the valve seat. The butterfly check valve has a simple structure and can only be installed on horizontal pipes, with good sealing performance.

 

Balanced check valve: A valve in which the valve disc slides along the center line of the valve body. The pipeline check valve is a new type of valve with small size, light weight, and good processing technology. It is one of the development directions of the check valve. However, the fluid resistance coefficient is slightly larger than that of the swing check valve.

 

Compression check valve: This valve is used as a boiler feed water and steam cut-off valve. It has the combined functions of a lift check valve and a stop valve or angle valve.

 

How is a Counterbalance Check Valve Set
 

The relief function has two important set points, the point at which the valve cracks open and the point at which the valve reseats. Although the delta between these two points varies between manufacturers, the reseat pressure is generally ~85% of the cracking pressure. For this reason, counterbalance check valves are normally set at 1.3 times the maximum load pressure. This ensures that the valve will reseat under the heaviest load conditions. Some manufacturers may specify a setting of 1.5 times the maximum load pressure if that value is less than 2000 PSI.

 

Counterbalance check valves are available in a variety of pilot ratios. Lower pilot ratios provide better motion control and stability, but are less efficient and may create excess heat. The opposite is true for higher pilot ratios. Therefore, pilot ratios of 3:1 or 4.5:1 are typically selected for load holding cylinder applications, as they provide a good balance between performance and efficiency.

 

Regardless of which pilot ratio is selected, calculating the pilot pressure requires consideration of the load pressure, the pilot ratio, and the cylinder ratio, as well as the location of the counterbalance check valve.

 

 

Our Factory

 

Automotive solenoid valves and sensors are our company's featured products. At the same time, our company is also a professional manufacturer specializing in the production of solenoid valve coils and special solenoid valves and other automation supporting components.

productcate-700-400
productcate-700-400
productcate-700-400
productcate-700-400

 

Our Certificate
 
productcate-1-1
productcate-750-606

Frequently Asked Questions (FAQ)

1. What is a counterbalance check valve?
A counterbalance check valve (non‑return valve or check valve) allows fluid to flow in one direction but prevents reverse flow. It is designed to maintain constant pressure or counterbalance in a system, preventing backflow that could cause system failure or damage.

2. What is the purpose of a counterbalance valve?
Counterbalance valves prevent oil from leaving a cylinder that is holding a load. Without the counterbalance valve, the load would move uncontrollably if oil pressure is lost.

3. What is the difference between a check valve and a counterbalance valve?
Pilot‑operated check valves provide a leak‑free seal. Counterbalance valves provide smoother operation when controlling the downward movement of a load. When a pilot check valve opens, the load may cause cylinder flow to lead pump flow, and the pilot signal can be lost.

4. What is another name for a counterbalance valve?
Counterbalance valves are also known as load control valves, over‑centre valves, motor overrun valves, or hose burst valves. Their most common use is supporting loads in lifting applications – cranes, scissor lifts, and excavators. They ensure the load does not drop when power is turned off.

5. What are the symptoms of a bad counterbalance valve?
Friction from dynamic seals can make the valve stick, causing pressure overshoot. The counterbalance valve then shifts to correct itself and undershoots. The result of hysteresis is bounce, loud chatter, or high‑pitch squealing.

6. At what pressure should a counterbalance valve be set?
Counterbalance valves are normally set at 1.3 times the maximum load pressure. This ensures the valve will reseat under the heaviest load conditions. Some manufacturers specify 1.5 times the maximum load pressure if that value is less than 2000 PSI (138 bar).

7. Is a counterbalance valve the same as a relief valve?
A counterbalance valve can be described as a pilot‑operated relief valve with a free‑flow check. The relief valve within the counterbalance valve provides the critical function of controlling flow from the cylinder.

8. How do you maintain a counterbalance check valve?
(1) Regular inspection – Check for leaks, wear, and proper operation. (2) Cleaning – Remove debris that could interfere with valve operation. (3) Lubrication – Apply lubricant to moving parts. (4) Replacement of parts – Replace worn or damaged parts promptly.

9. Does the counterbalance check valve come with a warranty?
Yes. Flying Bull provides a 1‑year warranty against manufacturing defects. Damage caused by contamination, incorrect setting, overpressure, or physical damage is not covered.

10. What is the difference between a counterbalance valve and a pilot‑operated check valve for load holding?
For simple load‑holding applications, a pilot‑operated check valve is suitable and more economical. For load‑holding and motion control (smooth lowering), a counterbalance valve is the answer and worth the extra cost.

 

Hot Tags: counterbalance check valve, China counterbalance check valve manufacturers, suppliers, factory, zoomlion solenoid valve replaced, liebherr solenoid valve replaced, kato solenoid valve replaced, sinomach solenoid valve replaced, truck solenoid valve, takeuchi solenoid valve replaced

You Might Also Like

(0/10)

clearall