Products

Home / Products/ Sensor / Pressure Sensor

Loader Pressure Sensor

Product Description: Loader Pressure Sensor for Volvo Wheel Loaders (17215536) Wheel loaders work under extreme conditions – heavy loads, constant vibration, and wide temperature swings. If the engine oil pressure sensor fails, you risk running with low oil pressure, which can destroy bearings and crankshafts in minutes. The loader pressure sensor from Flying Bull (OE Nos. 17216328 and 17215536) is a direct aftermarket replacement engineered specifically for Volvo wheel loaders. Real-Time Oil Pressure Monitoring This 17215536 pressure sensor monitors engine oil pressure in real time. It uses a ceramic piezoresistive chip that converts oil pressure into an electrical signal. That signal is sent to the loader’s control unit or dashboard gauge. When pressure drops below safe levels, the system alerts the operator. A faulty or drifting sensor provides false readings – either showing normal pressure when oil is low, or triggering warnings unnecessarily. Flying Bull’s Volvo loader pressure sensor is compatible with popular L-series models: L60F, L70F, L90F, L110F, L120F, and L350F. It is designed for normal-pressure oil systems and requires no modifications to the existing hydraulic or engine layout. Built to Survive the Toughest Conditions This sensor is built for the harsh realities of a construction site. It features an IP67 protection rating, meaning it is dust-tight and can withstand submersion in 1 meter of water for 30 minutes, ensuring reliable performance even during heavy rain or equipment washing. It has passed rigorous tests, including temperature cycling from -40°C to 125°C, vibration tests at 10g acceleration, and shock tests of 50g. Key technical features of this engine oil pressure sensor include: OE Cross-Reference: 17216328 and 17215536 (direct replacement). Measurement Range: 0–10 bar (matches Volvo loader engine specifications). Output Type: Push-pull (compatible with the original control system). Mounting: Flange design with screw holes (tightens to 20 N·m). Sensing Element: Ceramic piezoresistive chip (over 1 million cycles). Weight: 5 ounces (approx. 142 grams) – compact for tight engine compartments. 100% brand new with 1‑year warranty. Failure rate: below 0.3%. Delivery: 5–7 working days from Zhejiang, China. Straightforward Installation Installation is straightforward. The flange mount aligns with factory holes on the Volvo engine block. One person can install it without modifications. Each sensor is calibrated before shipment to ensure accurate readings. The output signal matches the original sensor exactly, so no control system adjustments are needed. For equipment maintenance teams and repair shops, replacing a failing loader pressure sensor prevents catastrophic engine damage.

Send Inquiry

Product Introduction

Pressure sensor for Volvo load excavator 17215536 11170253

Products Description

I. Features

Working Mode

This device operates in real-time monitoring mode. It uses a built-in high-precision sensor to keep a constant eye on changes in engine oil pressure.
It's designed for normal-pressure setups (with oil as the medium) and can fit right into a loader's existing hydraulic system without any extra adjustments.

Pressure and Accuracy Range

It measures pressure from [specific range, e.g., 0-10 bar], which lines up perfectly with the usual oil pressure levels in Volvo loader engines. That means it gives spot-on readings no matter what the loader's doing-whether it's idling or under heavy load.

Protection

It has an IP67 rating, so it's good at keeping out dust and water. It can even handle being submerged in 1 meter of water for 30 minutes without messing up how it works. So if it gets wet during rain or when cleaning the equipment, it'll keep going strong.

II. Installation and Compatibility

Installation Method

It uses a flange-mount design with screw holes in exactly the right spots, so it fits perfectly on Volvo loader engine blocks. No adjustments are needed when installing. The connection is solid (tightened to [specific value, e.g., 20 N·m]), so it can handle the equipment's vibrations.

It's small and light-only 5 ounces-so it fits easily in the tight space of a loader's engine compartment. You don't have to modify any parts to install it, and one person can get the job done, saving a lot of maintenance time.

Replaceability

This is a replacement part made just for Volvo loaders. It works smoothly with the L60F, L70F, L90F, L110F, L120F, and L350F series. The signal it sends out is the same as the original sensor, so you don't have to fuss with the control system settings.

We provide a full list of matching OEM part numbers, including 17216328 and 17215536. That means you can swap it out directly with the original part, and the monitoring data will work perfectly with the loader's original system.

III. Quality and Certification

Service Life

The main sensing part is a long-lasting ceramic piezoresistive chip, which can handle over a million measurement cycles. It's been tested through high and low temperature swings from -40°C to 125°C, so it stays steady even in really hot or cold conditions. It can last up to [specific duration, e.g., 5000 hours].

It's also been through vibration tests (10-2000Hz, 10g acceleration) and shock tests (50g, 11ms) to copy the rough vibrations and sudden jolts loaders face. This makes sure the part is tough enough for the job.

Certification Standards

It meets ISO9001 quality management standards and has CE certification. The way it's made follows strict rules for automotive electronic parts, so it's approved for use in Volvo equipment.

Failure Rate and Warranty

The manufacturer offers a one-year warranty. Every sensor goes through careful quality checks, including pressure calibration, so less than 0.3% of them fail. That gives users peace of mind for long-term use.

IV. Packaging and After-Sales Service

Packaging

Each sensor is packed in an anti-static bag, then wrapped in cushioning foam and put in a cardboard box. This keeps it safe from static damage and bumps during shipping. Each box can hold [specific quantity, e.g., 100 units], which is great for bulk orders and storage.

We also offer custom OEM labels-just tell us what you need, and we can print model numbers and certification info on them. This makes it easier to manage inventory and keep track of the product.

Delivery Time

We keep lots of standard models in stock, so they can be shipped within 5-7 business days after you confirm your order. For big orders, we can plan production ahead of time to make sure they arrive when you need them, so your equipment isn't left sitting idle.

OE NO.: 17215536
Warranty: 1 YEAR	Condition:New, 100% Brand-new
Place of Origin:Zhejiang, China	Ltem:Pressure Sensor
Brand Name:FLYING BULL	Quality:High-Quality
Delivery:5-7 Working Days	Pressure:Ordinary Pressure

Company Introduction

product-750-602

Frequently Asked Questions (FAQs)

1. Which Volvo loader models are compatible with this pressure sensor?
This sensor is compatible with Volvo L60F, L70F, L90F, L110F, L120F, and L350F wheel loaders. It is also suitable for related series within the same model families. Always verify your loader model against this list before ordering.

2. What original equipment (OE) part numbers does this sensor replace?
It directly replaces OE numbers 17216328 and 17215536. Cross-reference your old sensor's part number to confirm fitment. The product also matches 11170253 for certain applications.

3. How is this sensor installed, and what output does it provide?
The sensor uses a flange mount with screw holes that align with factory locations on the Volvo engine block. Installation torque is 20 N·m. The output type is push-pull, which matches the original sensor's signal characteristics – no control system reprogramming is required.

4. What is the measurement range and accuracy of this loader pressure sensor?
The measurement range is 0–10 bar, which matches typical oil pressure levels in Volvo loader engines during idle and heavy load conditions. The ceramic piezoresistive sensing element provides stable, accurate readings over more than 1 million measurement cycles.

5. What durability and warranty protections are provided?
The sensor is rated IP67 (dust-tight and submersible in 1 meter of water for 30 minutes). It has passed temperature cycling from -40°C to 125°C, vibration testing at 10g acceleration, and shock testing at 50g. The manufacturer offers a 1‑year warranty, with a documented failure rate below 0.3% under normal use. Each unit is pressure-calibrated before shipment.

6. How many pressure sensors come in one package, and what is the delivery time?
Each package contains 1 pressure sensor. Standard delivery time is 5–7 working days from Zhejiang, China. Bulk orders are available with custom packaging and labeling options.

Hot Tags: loader pressure sensor, China loader pressure sensor manufacturers, suppliers, factory, sleep sensor, traffic sensor, hvac sensor, intrusion detection sensor, battery sensor, dryer sensor

Previous: Pressure Sensor 3Mpa

Next: Automobile Parts Sensor